Frangipani Wedding Stationery
The frangipani evokes a wonderful carefree feeling to a summer wedding. When you choose the frangipani flower as a wedding theme, you welcome a cheerful feeling into your celebration.
These paper crafts set the stage for an afternoon or evening ceremony with a light and casual atmosphere. The varying hues of yellow and white are a perfect color combination for a warm weather wedding or a beach theme wedding.
Carry on the delight of the frangipani; display them everywhere throughout your celebration.
Frangipani Wedding Invitation
Makes three invitations.
Finished size 10 x 21cm (4” x 1/4”)
Invitation will fit into DL envelope 11 x 22cm (4 1/2” x 8 3/4”)
What you will need
-
21 x 29.5cm (A4) (8 1/4” x 12”) Yellow frangipani shimmer paper
- 21 x 29.5cm (A4) (8 1/4” x 12”) Bazzill card stock saltilo (burnt orange color)
- 21 x 29.5cm (A4) (8 1/4” x 12”) Bazzill card stock harvest (wheat colour)
- 21 x 29.5cm (A4) (8 1/4” x 12”) translucent paper
- 3 x Pearl heart buckles ivory color
- 45 cm (18”) rust color satin ribbon – wide enough to fit through the buckle
- 6x gold brads
- Scissors
- Ruler
- Pencil
- Craft glue
Instructions
- Create a document for 7 x 18 1/2cm (2 2/4” x 7 1/4”) using the translucent paper. Choose landscape as your page orientation. You will get three invitations printed on one page. Make sure you center the wording horizontally and begin 2cm (3/4”) from the top of the paper and leaving a 3cm (1 1/4”) space at the bottom trim to size.
- From the frangipani shimmer paper cut three pieces that are 8 x 19 1/2 cm (3 1/4” x 7 3/4”).
- Attach the printed invitation into the center of the frangipani paper using a little craft glue in each corner.
- From the burnt orange card stock cut three 9 x 21cm (3 1/2” x 8 1/2”) pieces. Center and attach the frangipani invitation on to this card stock using the craft glue.
- Make two holes on the top corners of the transparent paper (see above image for correct positioning) going through all three layers, add two gold brads (split pins).
- Cut the rust color ribbon into three equal lengths. Thread on the buckle and attach to the invitation (see above image for correct positioning), only add glue to the parts of the ribbon that go to the back of the card.
- From the wheat color card cut three pieces that are 10 x 21cm (4” x 8 1/2”) apply glue to the back of the burnt orange card and center onto the wheat color card.
Frangipani Wedding Place Cards
You will get four place cards from one sheet of A4 card.
The finished size of the place cards is 5½ x 10cm (2 1/2” x 4”).
What you will need
- 21 x 29.5cm (A4) (8 1/4” x 12”) Bazzill card stock harvest (wheat colour)
- Scrap of yellow frangipani shimmer paper
- Scrap of Bazzill card stock saltilo (burnt orange color)
- Scissors
- Ruler
- Pencil
- Craft glue
Instructions
- Using the wheat color card stock cut out four pieces that measure 11 x 10cm (4 1/2” x 4”).
- On the back of each piece find the center and using your ruler and the point of your scissors lightly score to make a fold line.
- Cut four pieces from the frangipani shimmer paper 2 1/2 x 10cm (1” x 4”).
- Cut four pieces from the burnt orange card 3 x 10cm (1 1/4” x 4”).
- To make the decorative edge, glue the frangipani paper to the burnt orange card align the bottom edges.
- Next glue the decorative edge to the wheat card also aligning the bottom edges.
Order of Service Booklet Cover for Frangipani Wedding
You will get one cover from one sheet of A4 card.
Note: You may be able to use some of the off cuts from the invitation for the decorative feature.
What you will need
- 21 x 29.5cm (A4) (8 1/4” x 12”) Bazzill card stock harvest (wheat color)
- Scrap of Yellow frangipani shimmer paper
- Scrap of Bazzill card stock saltilo (burnt orange color)
- Pearl heart buckle ivory color
- 60cm (24”) rust color satin ribbon – wide enough to fit through the buckle
- Scissors
- Ruler
- Pencil
- Craft glue
Instructions
- Print your wedding details on the lower section on the front half of the cover.
- On the back of the wheat card find the center and using your ruler and the point of your scissors lightly score to make a fold line.
- From the burnt orange card cut one 8 1/2 x 4 1/2cm (3 1/2” x 2”) piece.
- From the frangipani shimmer paper cut one 7 x 3 1/2cm (2 1/2” x 1 1/4”) piece.
- Glue the frangipani paper to the burnt orange card making sure that it is centered.
- Cut a 12cm (4 1/2”) piece of rust colored and thread on the pearl heart buckle.
- To attach the ribbon to the decorative center: apply glue to the back of the burnt orange card bring the ends of the ribbon to the back of the card and secure in place. Make sure that the ribbon is centered (see above picture for placement).
- Glue the finished decorative center to the wheat card stock to finish off.
- Use the remaining ribbon to secure the inner pages in place. Punch two holes on the center fold lines (of the cover and inner pages) thread through the ribbon and tie into a bow, trim away excess ribbon if needed.
Frangipani Wedding Favor Box
You will get one box from one sheet of A4 paper.
Note: There will be off cuts, use these for the other projects to keep the cost down.
Finished size approximately 7cm (2 3/4“).
What you will need
- 21 x 29.5cm (A4) (8 1/4” x 12”) Yellow frangipani shimmer paper
- 30cm (12’) of 5mm (1/4”) white organza ribbon
- 3mm (1/8”) hole punch
- Scissors
- Ruler
- Pencil
Instructions
- Download the pdf template
for the frangipani wedding favor box.
- Print and enlarge the template shape and trace on to heavy card, cut out to make a template.
- Using the pencil trace the shape onto the wrong side of the paper and transfer all the markings then cut it out.
- Using the ruler and the point of the scissors score the fold lines on the wrong side of the paper, then bend each side in towards the middle.
- Punch a hole on each side where marked.
- Thread the ribbon through one of the holes (starting from the inside of the box) continue to thread through the other holes. Keep the ribbon loose.
- Bring up each side and tuck one under the other to form the box. Place the wedding favor inside.
- Carefully pull the ribbon tight to close the box and tie it in a bow to finish.
For more DIY Wedding Projects see Wedding Craft Ideas
|
Can't
find
what you
are looking for?
Try Google
Search!
|
